In moment’s digital period, having flawless internet content throughout your home or office is pivotal. still, numerous people still face dead zones or weak signals in certain areas. Fortunately, you don’t need to buy an precious mesh system to break this issue. You can fluently turn your router into a Wi- Fi access point and significantly boost your wireless network content. In this companion, we’ll walk you through every step in clear detail.
Why Convert Your Router into a Wi- Fi Access Point?
First of all, reusing an old router as a Wi- Fi access point is a smart and cost-effective result. Rather of letting that redundant device collect dust, you can give it a new life. Also, an access point improves your wireless signal in larger spaces where a single router might not serve. Also, this system helps reduce network traffic by unyoking bias between multiple routers, which leads to better performance.
What You Need Before Getting Started
Before diving into the setup process, make sure you have these particulars ready
- A main router with internet access
- A alternate router( the bone you will turn into an access point)
- An Ethernet string
- Power appendages for both routers
Importantly, both routers should be turned off before you start connecting them. Also, insure that the secondary router supports Access Point( AP) mode or can be configured manually.
Step 1 Connect the Routers
To begin, place your secondary router in an area that needs better Wi- Fi content. Next, run an Ethernet string from one of the LAN ports of your primary router to one of the LAN ports on the secondary router. Don’t use the WAN harborage on the secondary router unless the firmware specifically allows it. This direct LAN- to- LAN connection will allow both routers to be on the same network.
Likewise, use a quality Ethernet string to avoid data loss or speed declination. After plugging in the string, power on both routers.
Step 2 Access the Secondary Router Settings
Now it’s time to configure your alternate router. First, connect a laptop or PC to the secondary router using a wired or wireless connection. also, open a cyber surfer and type the router’s IP address( generally 192.168.0.1 or 192.168.1.1) to pierce the admin panel.
Once you’re logged in, look for LAN or network settings. Change the IP address of the secondary router to commodity within the range of the primary router but outside its DHCP range — for illustration, 192.168.1.2. This avoids IP conflicts. After making changes, save and reboot the device.
Step 3 Disable DHCP on the Secondary Router
Next, it’s essential to disable the DHCP garçon on the secondary router. This ensures that only the primary router handles IP address assignments across your network. However, you’ll face IP conflicts and poor performance, If both routers have DHCP enabled.
also, look for wireless settings and brand the SSID to match your primary router, or keep it different if you prefer relating them independently. Also, use the same Wi- Fi word and encryption type( e.g., WPA2) to allow flawless roving between the two bias.
Step 4 Final Check and Placement
After saving all settings and rebooting, test the connection. First, open your device from the secondary router and reconnect via Wi- Fi. Also, try penetrating the internet. However, your device should now admit internet through the access point, If everything was done rightly.
Likewise, you can optimize placement by running speed tests in colorful corners of your space. However, consider displacing the secondary router closer to the weak signal zone, If pets are still low.
Advantages of This Setup
Turning your router into an access point has multiple benefits. Most importantly, it improves Wi- Fi content without investing in new tackle. Also, this setup reduces network traffic and offers stable internet performance for multiple bias. It’s also a great way to repurpose old tech rather than discarding it.
Common miscalculations to Avoid
Although this process is straightforward, a many common miscalculations can disrupt your setup. Be sure not to
- Connect the routers using the WAN harborage( unless needed)
- Leave DHCP enabled on the alternate router
- Use the same IP address for both routers
- Forget to secure the network with a strong word
Avoiding these miscalculations ensures a smooth configuration experience and long- term network stability.
Final studies
By following this step- by- step companion, you can turn your old router into a important Wi- Fi access point that strengthens your home or office network. Not only is this system cost-effective, but it also makes your online experience important smoother. Whether you’re streaming 4K vids, playing online games, or hosting videotape calls, a well- placed access point can make a conspicuous difference.
For the stylish results, make sure to routinely modernize your router’s firmware and check for performance backups. With just a bit of trouble, you can transfigure your network and exclude weak signal areas for good.
